SavePart saves the partition tables and boot sectors of all of the hard disks in your system. If the drive is a HPFS partition, then the super and spare blocks are also saved.
Usage: SavePart {Switches} Drive Spec
SavePart forms part of the disaster recovery of The Graham Utilities for OS/2. It saves the partition tables and boot sectors of all local hard disks on your system onto the Crash Recovery disk. If the drive is HPFS then the super and spare blocks are also saved.
If you should accidentally FDISK your system and remove some partitions, or an errant program has destroyed your partition tables, your machine will be unusable. If you have saved this information, then RestPart can be used to restore it. SavePart is called as part of the installation process.
It is recommended that you run SavePart BEFORE and AFTER you change your partitions.
SavePart is designed to save all of its information on the Crash Recovery disk which is supplied. The Crash Recovery disk should be in the drive which you specify. If it is not in the drive, then you will be prompted with the following dialog box:
This switch forces SavePart to display the drives which it is saving. By default, it only displays the initial copyright line.
SavePart A:This saves the information of all of your hard disks onto the Crash Recovery disk in drive A:
SavePart A: -vIn addition to saving the information of all of your hard disks, SavePart will also display the drives which it is saving. A typical example is:
[SavePart, V1.00 - 03/04/95 - (C) Chris Graham - WarpSpeed Computers] Saving to: A:\401563B6.DAT Saving C: SYSTEM DISK 70Mb (FAT) Saving D: APPLICATION 150Mb (FAT) Saving E: DEVELOPMENT 150Mb (HPFS) Saving F: COMPLIERS 150Mb (HPFS) Saving G: WINDOWS NT 150Mb (FAT) Saving H: SPARE 637Mb (HPFS)